-
- tanks
5400 liters tank in Stainless 304
- 128 000 SEK /st exkl moms
- item available on order Article type: brand new storage tank - type K5-SL Additional information: inner surface 0.8µ Volumetric volume (L): 5.400 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model:…
- Add to cart
-
- tanks
400 liter tank in stainless steel 304
- Be om offert
- Article type: second-hand mixing tank Additional information: Stainless steel V-mixer with a capacity of 400 liters equipped with an intensification bar (prepared for inerting or liquid injection) to improve mixing. Supply through the two upper holes with manual cover and discharge with a 200 mm diameter butterfly valve. The intensifier bar motor is 5.5 hp (1430 rpm) * With electrical…
- Add to cart
-
- tanks
6800 liters tank in Stainless 304
- 65 000 SEK /st exkl moms
- Additional information: spirits; Manhole approx. 350 x 450 mm Volumetric volume (L): 6.800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position…
- Add to cart
-
- tanks
5400 liter tank in Acid-proof 316
- 176 000 SEK /st exkl moms
- item available on order Article type: brand new storage tank - type K3-H12W.L Volumetric volume (L): 5.400 L Max. density P (kg/m³): 1.600 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single jacketed with…
- Add to cart
-
- tanks
2500 liter tank in Acid-proof 316
- 174 000 SEK /st exkl moms
- Additional information: 4 claws made of stainless steel 304; fastening screws of the manhole cover incomplete; 1 former connection in the upper bottom was welded shut by the previous operator; some residues of previous content; motor-/gear is missing Volumetric volume (L): 2.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 1 Bar Max.…
- Add to cart
-
- tanks
11500 liters tank in Stainless 304
- 97 000 SEK /st exkl moms
- Additional information: Ethanol; some residues of previous content Volumetric volume (L): 11.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of…
- Add to cart
-
- tanks
5600 liter tank in Stainless 304
- 241 000 SEK /st exkl moms
- Additional information: Flanged to the outlet 1 reduction to diameter 65 mm; 1 immersion pipe inside the vessel; 1 pallet with accessories (foot pedestals, fittings etc.) is included in the scope of delivery; these accessories have not been taken into account in the total height stated Volumetric volume (L): 5.600 L Pressure in tank: pressure and vacuum Max. pressure (Bar):…
- Add to cart
-
- tanks
70800 liters tank in Stainless 304
- 247 000 SEK /st exkl moms
- Additional information: fresh water tank in brewery; Manhole approx. 350 x 450 mm in the front base; one vessel (9540-1) with small bump under the storage shell, one vessel (9540-2) without type plate; up to 4 additional tanks of the same design can be made available on request. The following saddle feet could be purchased separately for the vessel: https://www.beiser-agrar.de/loschwassertank-sattelfuse-fur-tank-aus-metall-3000mm-p-523.html…
- Add to cart
-
- tanks
5400 liter tank in Acid-proof 316
- 138 000 SEK /st exkl moms
- item available on order Article type: brand new storage tank - type K5-SL Additional information: inner surface 0.8µ Volumetric volume (L): 5.400 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model:…
- Add to cart















