-
-
- tanks
5400 liters tank in Stainless 304
- 127 000 SEK /st exkl moms
- item available on order Article type: brand new storage tank - type K5-SL Additional information: inner surface 0.8µ Volumetric volume (L): 5.400 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model:…
- Add to cart
-
-
-
- tanks
400 liter tank in stainless steel 304
- Be om offert
- Article type: second-hand mixing tank Additional information: Stainless steel V-mixer with a capacity of 400 liters equipped with an intensification bar (prepared for inerting or liquid injection) to improve mixing. Supply through the two upper holes with manual cover and discharge with a 200 mm diameter butterfly valve. The intensifier bar motor is 5.5 hp (1430 rpm) * With electrical…
- Add to cart
-
-
-
- tanks
6800 liters tank in Stainless 304
- 65 000 SEK /st exkl moms
- Additional information: spirits; Manhole approx. 350 x 450 mm Volumetric volume (L): 6.800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position…
- Add to cart
-
-
-
- tanks
5400 liter tank in Acid-proof 316
- 175 000 SEK /st exkl moms
- item available on order Article type: brand new storage tank - type K3-H12W.L Volumetric volume (L): 5.400 L Max. density P (kg/m³): 1.600 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single jacketed with…
- Add to cart
-
-
-
- tanks
2500 liter tank in Acid-proof 316
- 173 000 SEK /st exkl moms
- Additional information: 4 claws made of stainless steel 304; fastening screws of the manhole cover incomplete; 1 former connection in the upper bottom was welded shut by the previous operator; some residues of previous content; motor-/gear is missing Volumetric volume (L): 2.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 1 Bar Max.…
- Add to cart
-
-
-
- tanks
11500 liters tank in Stainless 304
- 97 000 SEK /st exkl moms
- Additional information: Ethanol; some residues of previous content Volumetric volume (L): 11.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of…
- Add to cart
-
-
-
- tanks
5600 liter tank in Stainless 304
- 239 000 SEK /st exkl moms
- Additional information: Flanged to the outlet 1 reduction to diameter 65 mm; 1 immersion pipe inside the vessel; 1 pallet with accessories (foot pedestals, fittings etc.) is included in the scope of delivery; these accessories have not been taken into account in the total height stated Volumetric volume (L): 5.600 L Pressure in tank: pressure and vacuum Max. pressure (Bar):…
- Add to cart
-
-
-
- tanks
70800 liters tank in Stainless 304
- 246 000 SEK /st exkl moms
- Additional information: fresh water tank in brewery; Manhole approx. 350 x 450 mm in the front base; one vessel (9540-1) with small bump under the storage shell, one vessel (9540-2) without type plate; up to 4 additional tanks of the same design can be made available on request. The following saddle feet could be purchased separately for the vessel: https://www.beiser-agrar.de/loschwassertank-sattelfuse-fur-tank-aus-metall-3000mm-p-523.html…
- Add to cart
-
-
-
- tanks
5400 liter tank in Acid-proof 316
- 137 000 SEK /st exkl moms
- item available on order Article type: brand new storage tank - type K5-SL Additional information: inner surface 0.8µ Volumetric volume (L): 5.400 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model:…
- Add to cart
-
-
-
- tanks
1000 liter tank in Acid-proof 316
- 214 000 SEK /st exkl moms
- Article type: second-hand mixing tank Additional information: Previous product was Bacteria. The tank was built by us and includes a complete file. A 1-year warranty on everything. The tank is in very good condition and has not been used much. Built in 2023, the tank will be completely cleaned, photos will follow as soon as possible; we can’t give any…
- Add to cart
-